Prolec PDMKit001 Power Distribution Unit for Fuses

Prolec PDMKit001 Power Distribution Unit for Fuses

This kit can supply fused power for up to 20 output circuits fed by 2 input power leads connected to the rear studs of the block. Each input stud supplies power to one side of the block (10 circuits). The block can be used to replace an existing unit or simply to extend the number of fuse protected power circuits that are available. The fuse block offers a high level of water and dust protection (rated IP66-IEC 60529) when assembled correctly with supplied cavity plugs and cover.

KIT CONTENTS:
1 x 20 Circuit Minifuse block with silicone seal,
dual busbar inputs & silicone stud caps.
1 x Shallow fuse cover with Gore automotive vent.
2 x Stainless steel mounting brackets.
4 x Stainless steel lock washers.
4 x Stainless steel bolts.
10 x Silicone cavity plugs.
5 x Minifuse 5A, 32Vdc.
5 x Minifuse 7.5A, 32Vdc.
5 x Minifuse 10A, 32Vdc.
5 x Minifuse 15A, 32Vdc.
5 x Minifuse 20A, 32Vdc.
5 x Minifuse 25A, 32Vdc.
5 x Minifuse 30A, 32Vdc.
10 x 1.84mm² x 300mm long output cable (red) with terminal & silicone cable seal crimped to one end.
10 x 1.84mm² x 300mm long output cable (blue) with terminal & silicone cable seal crimped to one end.
20 x #16-14 AWG (1.23 - 1.94mm²) Perma-Seal butt connectors with heat shrink insulation.
1 x Instruction sheet.